Fiero Torx Sockets

Torx Sockets

Torx sockets for all your Fiero needs.

T-25 - Used in various locations on the Fiero. 3/8" drive
T-30 - This is the torx socket used for the special torx fasteners on the doors. This is the only T-30 available today that has the 3/8" drive. Why is that important? Removing the torx screws that hold the door panels on is very difficult. It is very easy to strip the heads out. Using a new torx driver with a 3/8" drive is the best way to insure you do not ruin the special bolts.
T-47 - This is the torx socket used for the seat belt bolts. Also used on the seat bottoms. 3/8" drive.
T-50 - This is the torx socket used on the 84-87 brake calipers, also the door striker bolts for all years. 3/8" drive.
T-55 - This is the torx socket needed to remove the calipers on the 1988 Fiero. 3/8" drive.


T30 Torx Socket	T25 Torx Socket


T47 Torx Socket	T50 Torx Socket

	T10 Torx Bit T40 Torx Bit
T55 Torx Socket

Torx Sockets
Code	Qty	Description	Item Cost
		T25 Torx Socket 3.00 S&H	$3.95
		T30 Torx Socket 3.00 S&H	$4.55
		T47 Torx Socket 3.00 S&H	$4.65
		T50 Torx Socket 3.00 S&H	$4.70
		T55 Torx Socket 3.00 S&H	$4.75

No part of this site may be copied or stored in an archival system without prior written permission of Rodney Dickman's Fiero Accessories.. Rodney Dickman's Fiero Accessories is NOT associated with General Motors Corp. or any of it's subsidiaries. References to products on this site are made for identification purposes only.