Deck Lid Hardware

Deck Lid Strap Kit

Replace your worn or broken deck lid hardware! These kits allow you to replace the rear deck lid limit straps. The hinge assemblies have to be removed to install these straps. The original rivet/fastener will need to be drilled out and the new rivet and cable installed and swegged from the back side. The new rivets are 304 stainless steel. There are 2 variations of rear deck lid hinges. One variation is where the lower bracket is made of thicker steel and the other variation is where the lower bracket is the same thickness as the upper bracket and has welded in reinforcements. The thicker lower bracket requires a longer rivet. The thin style has brackets that are both equal in thickness so both rivets are the same in length. The pictures below show how to tell them apart. The thick style has the small opening. The thin style has the large opening. Be sure to order the correct kit to fit your hinges!
	Stainless Steel Deck Lid Hinge Rivet

Thick Lower Thin Lower
Available with 304 Stainless Cable End like OEM, or with an Economy Plated End. Sold in pairs only. All Kits Include Replacement Hinge Rivets made from 304 stainless steel.

Deck Lid Hardware
Code	Qty	Description	Item Cost
		Deck Lid Hinge Straps w/ 304 Stainless Steel Ends (pr) $5.00 S&H Style:	$29.00
		Deck Lid Hinge Straps w/ Plated Steel Ends (pr) $5.00 S&H Style:	$21.00

No part of this site may be copied or stored in an archival system without prior written permission of Rodney Dickman's Fiero Accessories.. Rodney Dickman's Fiero Accessories is NOT associated with General Motors Corp. or any of it's subsidiaries. References to products on this site are made for identification purposes only.