88 drivers side shown
High Quality Stainless Fasteners
Stainless Steel Exhaust Hangers
| The original stainless steel exhaust system on the Fiero used exhaust hangers made from mild steel. Anyone that has done exhaust work on a Fiero knows that the old rusted exhaust hangers are pretty much useless, since cutting the rusted exhaust hanger bolts is usually required for removal. The unsitely apperarance of a well rusted exhaust hanger is another area of concern. My 304 Stainless Steel exhaust hangers will solve these problems, and give the stainless steel Fiero exhaust system the finishing touch it deserved from the factory. | |
|
High Quality Stainless Fasteners |
NOTE ON EXHAUST HANGERS: The original Fiero exhaust systems and the exhaust hanger(s)
are held in place with several springs. With more and more
non OEM exhaust systems being installed today, many do not have the brackets
required to reattach the factory springs in the correct locations if at
all. In addition to this, many aftermarket exhaust systems weight more
than the OEM systems. The exhaust hangers are not designed to hold the
complete exhaust system up. If you do not have the factory springs
installed you must provide additional support for the muffler and
exhaust pipes or the rubber piece(s) will fail.
Available in sets which consist of 1-driver side and 1-passenger side hanger, or individually.
Please specify engine type and orientation (for individual hangers).