Fiero Steering Rack Rebuilding Parts

(Inner Tie-Rod End)	(Rack Bellows)

The rack and the pinion gear is never replaced on rebuilt units as you can not get new ones. With new Inner Tie-Rod ends, new 88 pinion bearing, and a new 84-87 or 88 rack bushing, you can rebuild you rack yourself for much less than buying the standard rebuilt units. The Pinion Bearing fits only 88;s and is seldom needed, so only order one if you really need it.
Rack Bellows fits both sides 88, and 84-87 drivers side.

Note : Before ordering any parts take the time to pull the passenger side boot back to see if any looseness is in the rack bushing or inner tie rod. You can cut the original metal clamps. Use plastic tie wraps to replace the steel clamps. Also look at the inner steel rack to see if it is rusted. If it shows any signs of being rusty all the rust will have to be polished off before a new rack bushing can be installed.

Steering Rack Parts
Code	Qty	Description	Item Cost
		88 Inner Tierod Ends (ea) $5.00 S&H	$25.00
		Bellows (ea) $4.00 S&H	$17.00
		84-87 Inner Tie-Rod Ends (ea) $5.00 S&H	$25.00

* Discount S&H charge. Order multiples of this item and save!!