 |
88 Steering Rack Bushing
1988 passenger side steering rack bushing made of bearing
bronze alloy C93200. This is the much better than the material
rebuilders commonly use. It requires that you drill 2 holes and
rivet it in with two 1/8" stainless steel rivets (included).
The original plastic bushing is no longer available through GM.
|
Rack Bushing (shown installed)
Note : Before ordering any parts take the time to pull the passenger side boot back to see if any looseness is in the rack bushing or inner tie rod. You can cut the original metal clamps. Use plastic tie wraps to replace the steel clamps. Also look at the inner steel rack to see if it is rusted. If it shows any signs of being rusty all the rust will have to be polished off before a new rack bushing can be installed.