Zero Lash End Links

This is the next generation of sway bar end links. You can now enjoy the full potential of your sway bar with these new "No Play" sway bar end links. Based on a ball and socket design similar to ball joints these next generation end links have no play. They follow any and all angular movements of the sway bar and swing arm.


Short Zero Lash End Link	Long Zero Lash End Link

Typical OEM sway bar ends links have rubber bushings. While these work fine for everyday driving some enthusiasts prefer more. Typically these enthusiasts switch to polyurethane sway bar ends links. While these do provide a quicker reacting sway bar action they tend to bind as they change in their angle in relation to the sway bar. They also tend to compress and decompress as forces are applied against them. With these No Play end links there is no binding as they follow any angular changes in the sway bar in relation to the swing arm. They also have no play when it comes to compression and decompression.


Conventional End Link	Zero Lash End Link

These end links weigh approximately the same or slightly heavier than OEM sway bar end links of the same length. Typically they may be about 10% heavier. Easy to install.

NOTE: There are available in longer lengths when you use my lowering (drop) ball joints.
Please use the notes area in the order form if ordering longer end links.
Please let me know what year and why you need longer end links.
Contact me for other special applications.

Zero Lash End Links
Code	Qty	Description	Item Cost
		84-87 Front (pair) $7.00 S&H	$43.95
		88 Front (pair) $7.00 S&H	$43.95
		88 Rear (pair) $7.00 S&H	$43.95